HP LaserJet 8000 Multifunction Printer series - Manual (Page 207)

Chapter 5 Problem Solving 207
Determining Printer Problems
Paper is not going to the
correct output bin.
z
Verify that the correct output bin is selected in the printer diver. For
more information on changing printer driver settings, see the
online help.
z
The paper does not meet the specifications for the output bin. See
page
256 for more information on paper specifications.
z
If you are trying to send print jobs to an optional multibin mailbox,
verify that the multibin mailbox has been installed on the printer
and in the printer driver. Also verify the multibin mailbox mode,
which will affect the print job destination.
The multibin mailbox will
not power on.
z
Verify that the power cord is firmly plugged into both the multibin
mailbox and the power receptacle. Remove and reconnect the
power cord.
z Ensure that the cable from the multibin mailbox is plugged into the
printer parallel connector. If not, turn the printer off and plug the
cable into the parallel connector, then turn the printer back on. See
page
210 for cabling configurations.
z
Verify that the cables are firmly attached to the printer.
Problems with the Optional Multibin Mailbox (8 bins) (continued)