Communicating with an optional hp jetdirect 600n p – HP LaserJet 8000 Multifunction Printer series User Manual
Page 221
Chapter 5
Problem Solving
221
Determining Printer Problems
Communicating with an Optional HP JetDirect 600N
Print Server
If the printer contains an optional HP JetDirect internal print server, and you
cannot communicate with the printer over the network, verify operation of the
print server. Check the JetDirect Configuration Page for the message
I/O CARD
READY
. (Follow the steps on page
to print a configuration page.) For
troubleshooting information, refer to the HP JetDirect software installation
guide.
HP JetDirect 600N 10/100Base-TX Print Server
If the printer contains an optional HP JetDirect 10/100Base-TX print server,
check to see that the print server was able to link to the network.
z
Check the link-speed LEDs (10 or 100) on the print server. If both are off,
the card failed to link to the network.
Continued on next page.