HP LaserJet 8000 Multifunction Printer series - Manual (Page 232)

Chapter 5 Problem Solving 232
Checking the Printer’s Configuration
PCL or PS Font List
Use the font lists to see which fonts are currently installed in the printer. (The
font lists also show which fonts are resident on an optional hard disk or flash
DIMM.)
To print a PCL or PS font list:
1. Press M ENU repeatedly until INFORMATION MENU appears.
2. Press I TEM repeatedly until PRINT PCL FONT LIST or PRINT PS FONT LIST appears.
3. Press S ELECT to print the font list.
The PS font list shows the PS fonts installed, and gives a sample of those
fonts. The following describes the information that can be found on the PCL
font list:
z
Font gives the font names and samples.
z
Pitch/Point indicates the pitch or point size of the font.
z
Escape Sequence (a PCL programming command) is used to select the
designated font. (See the legend at the bottom of the font list page.)
Note For step-by-step instructions on using printer commands to select a font
with DOS applications, see page
327 .
Continued on next page.