HP Insight Management for Tivoli - Manual (Page 20)

Appendix B: HP SNMP events 20
Appendix B: HP SNMP events
HP SNMP events
The following tables list all of the HP ProLiant SNMP definitions delivered with the rules file for
Netcool/OMNIbus v5.0. The events are organized according to MIB type and object identifier.
CR3500 RAID controller (CPQCR.MIB)
Trap types Rules file Description Netcool
severity
cpqCrController1FailureTrap
(1)
1 This event occurs when the primary
controller in the subsystem has
failed.
Critical (5)
cpqCrController1InformationTr
ap (2) 2 This event occurs when the primary
controller in the subsystem has
recovered.
Clear (0)
cpqCrController2FailureTrap
(3)
3 This event occurs when the
secondary controller in the
subsystem has failed.
Critical (5)
cpqCrController2InformationTr
ap (4) 4 This event occurs when the
secondary controller in the
subsystem has recovered.
Clear (0)
cpqCrLogDriveInformationTrap
(5)
5 This event occurs when a RAIDset
has become optimal.
Clear (0)
cpqCrLogDriveFailureTrap (6) 6 This event occurs when a RAIDset
has failed.
Critical (5)
cpqCrLogDriveReconstructTrap
(7)
7 This event occurs when a RAIDset
has started the reconstruction
process.
Minor (3)
cpqCrLogDriveReducedTrap
(8) 8 This event occurs when a RAIDset
has become degraded. Major (4)
cpqCrLogDriveInitializingTrap
(9) 9 This event occurs when a RAIDset is
initializing. Minor (3)
cpqCrDiskInformationTrap
(10)
10 This event occurs when a disk drive
has recovered.
Clear (0)
cpqCrDiskFailureTrap (11) 11 This event occurs when a disk drive
fails.
Critical (5)
cpqCrDiskReconstructTrap
(12)
12 This event occurs when a disk
member of a logical drive has
begun the reconstruction process
and will be available for use when
reconstruction is complete.
Minor (3)