HP Insight Management for Tivoli - Manual (Page 59)

Appendix B: HP SNMP events 59
Trap types Rules file Description Netcool
severity
cpqRPMTrapUPSCheckBreaker
(21041) 21041 This event occurs when a UPS device
reports an output Breaker or Relay failed or
is stuck open or closed.
Major (4)
cpqRPMTrapUPSCheckBreakerCl
eared (21042)
21042 This event occurs when a UPS device
reports all breakers are functioning
normally.
Clear (0)
cpqRPMTrapUPSCabinetDoorOp
en (21045) 21045 This event occurs when a UPS device
reports a cover panel is removed while
utility power is present.
Critical (5)
cpqRPMTrapUPSCabinetDoorOp
enCleared (21046)
21046 This event occurs when a UPS device
reports a cover panel is replaced.
Clear (0)
cpqRPMtrapUPSBypassOnAuto
(21047)
21047 This event occurs when a UPS device is
operating in auto bypass mode.
Major (4)
cpqRPMtrapUPSBypassOnAutoC
leared (21048)
21048 This event occurs when a UPS device
reports it is no longer on auto bypass.
Clear (0)
cpqRPMTrapUPSBatteriesDiscon
nected (21053)
21053 This event occurs when a UPS device
reports batteries are not connected to the
UPS.
Major (4)
cpqRPMTrapUPSBatteriesDiscon
nectedCleared (21054) 21054 This event occurs when a UPS device
reports all UPS batteries are reconnected. Clear (0)
cpqRPMTrapUPSBatteryLow
(21055)
21055 This event occurs when a UPS device
reports a low battery.
Critical (5)
cpqRPMTrapUPSBatteryLowClear
ed (21056)
21056 This event occurs when a UPS device
reports a low battery is cleared.
Clear (0)
cpqRPMTrapUPSBatteryDischarg
ed (21057)
21057 This event occurs when a UPS device
reports batteries are completely
discharged.
Major (4)
cpqRPMTrapUPSBatteryDischarg
edCleared (21058) 21058 This event occurs when a UPS device
reports all UPS batteries are charged. Clear (0)
cpqRPMtrapUPSBypassONManu
al (21059) 21059 This event occurs when a UPS device is
operating in manual bypass mode. Major (4)
cpqRPMtrapUPSBypassOffManu
al (21060) 21060 This event occurs when a UPS device
reports it is no longer in manual bypass
mode.
Clear (0)
cpqRPMTrapUPSOnBattery
(21063)
21063 This event occurs when a UPS device
reports on battery condition.
Major (4)
cpqRPMTrapUPSOnUtilityPower
(21064)
21064 This event occurs when a UPS device
reports on utility power condition.
Clear (0)
cpqRPMTrapUPSDCStartOccurre
d (29998)
29998 This event occurs when the UPS started on
battery when AC input power is not
present.
Clear (0)
cpqRPMTrapUPSDCStartOccurre
dCleared (29999) 29999 This event occurs when the UPS started on
utility while AC input power is present. Clear (0)
CpqRPMTestTrap(50001) 50001 This event occurs when a trap to test SNMP
setup is sent.
Clear (0)