HP XP7 Storage - Manual (Page 233)

Table 53 SSB codes returned by raidcom delete external_grp (continued)
raidcom delete external_grp
Description Error code Executing/
Async Error message
SSB2 SSB1
The external volume is used as a Business Copy reserved VOL. 4107 2E30 Async Get Command Status
The external volume is used as a Auto LUN V2 reserved VOL. 4108 2E30 Async Get Command Status
There is a mainframe path group setting in the external volume. 4109 2E30 Async Get Command Status
There is a Data Retention setting in the external volume. 410A 2E30 Async Get Command Status
There is a mainframe LDEV Guard setting in the external volume. 410B 2E30 Async Get Command Status
There is a Volume Security for Mainframe setting in the external
volume. 410C 2E30 Async Get Command Status
The external volume is used as a Continuous Access Journal pair
volume. 410D 2E30 Async Get Command Status
The external volume is used as a Continuous Access Journal
journal volume. 410E 2E30 Async Get Command Status
The external volume is used as a pool-VOL. 410F 2E30 Async Get Command Status
The external volume is used as a pool-VOL. 4110 2E30 Async Get Command Status
The external volume is used as a Auto LUN V2 VOL. 4111 2E30 Async Get Command Status
The external volume is used as a Auto LUN V2 VOL. 4112 2E30 Async Get Command Status
The target external group cannot be deleted because a ESAM
Quorum disk exists in it. 0001 2E31 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EDA Executing CMDRJE
An internal error occurred. FFFB 2EE8 Async Get Command Status
Call HP Technical Support.
An internal error occurred. 41FF 2EFF Async Get Command Status
Call HP Technical Support.
Table 54 SSB codes returned by raidcom check_ext_storage path
raidcom check_ext_storage path
Description Error code Executing/
Async Error message
SSB2 SSB1
The path group is not in the enabled range. 4500 2E00 Executing CMDRJE
The value of the port is not enabled. 8400 2E00 Executing CMDRJE
The specified external volume has already disconnected the
path, or is in the process of checking path. 4301 2E10 Async Get Command Status
The target LDEV is blocked. 001B 2E11 Async Get Command Status
The path for the specified external path is in the state of
disconnected. 4000 2E11 Async Get Command Status
All the paths for the specified external path are blocked. 4302 2E11 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
Error messages and error codes 233