HP XP7 Storage - Manual (Page 289)

Table 106 SSB codes that are returned by raidcom delete path command
raidcom delete path
Description Error code Executing/
Async Error message
SSB2 SSB1
The path group is not in a effective range. 4500 2E00 Executing CMDRJE
The value of the specified port is incorrect. 8400 2E00 Executing CMDRJE
The path operations cannot be performed for the following
reasons: 4303 2E10 Async Get Command Status
•
The target of the specified path group is XP12000 Disk
Array/XP10000 Disk Array.
• The specified path group contains the external volume that
is set the reserve attribute from the host.
The operation cannot continue because the microcode is being
replaced. 8011 2E11 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
There is no external volume group. 4100 2E20 Executing CMDRJE
There is no external connection path. 4300 2E20 Executing CMDRJE
WWN is not registered. 4400 2E20 Executing CMDRJE
There is no path group. 4500 2E20 Executing CMDRJE
/Async Get Command Status
Paths cannot be deleted because there are no normal paths. 4300 2E23 Executing CMDRJE
/Async Get Command Status
The port attribute is not External (ELUN). 8400 2E30 Executing CMDRJE
The command cannot be accepted. After a while, execute the
same command. 00EE 2EDA Executing CMDRJE
An internal error occurred. FEEC 2EDA Async Get Command Status
Call HP Technical Support.
An internal error occurred. FFFF 2EDA Async Get Command Status
Call HP Technical Support.
Table 107 SSB codes that are returned by raidcom add path command
raidcom add path
Description Error code Executing/
Async Error message
SSB2 SSB1
The path group is not in the enabled range. 4500 2E00 Executing CMDRJE
The value of specified port is incorrect. 8400 2E00 Executing CMDRJE
The path operations cannot be performed for the following
reasons: 4303 2E10 Async Get Command Status
•
The target of the specified path group is XP12000 Disk
Array/XP10000 Disk Array.
•
The specified path group contains the external volume that
is set the reserve attribute from the host.
Error messages and error codes 289