HP XP7 Storage - Manual (Page 257)

Table 77 SSB codes that are returned by raidcom modify pool command (continued)
raidcom modify pool
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified pool for Thin Provisioning cannot be changed to
a pool for Smart Tiers because the pool is related to TSE-VOL. 6002 2E13 Executing CMDRJE
Pool ID is not installed. 6000 2E20 Executing CMDRJE
The specified Tier number is invalid. 6101 2E20 Executing CMDRJE
SM for Thin Provisioning is not installed. 8101 2E21 Executing CMDRJE
SM for Smart Tiers is not installed. 8102 2E21 Executing CMDRJE
The Smart Tiers operation cannot be done to the pool because
the specified pool contains the external volumes whose cache
mode is invalid. 006E 2E30 Executing CMDRJE
The threshold value 1 is out of range. 6000 2E30 Executing CMDRJE
The specified pool is for Fast Snap or Snapshot. 6003 2E30 Executing CMDRJE
The specified pool must be assigned two user-defined thresholds
to. 6005 2E30 Executing CMDRJE
The specified pool is not the pool for Smart Tiers. 600D 2E30 Executing CMDRJE
The specified pool includes the different RAID levels of volumes
although the pool cannot include those volumes together. 6004 2E31 Executing CMDRJE
The specified pool includes external volumes although the pool
cannot include those volumes together. 6005 2E31 Executing CMDRJE
The specified pool cannot be used for a Smart Tiers. 6006 2E31 Executing CMDRJE
The capacity that can be used by the installed program products
exceeds the maximum. 9000 2E31 Executing CMDRJE
The program product is not installed. 9001 2E31 Executing CMDRJE
Pool ID is not installed. 0001 2EE7 Executing CMDRJE
An internal error occurred at the pool operation. 0011 2EE7 Executing CMDRJE
Call HP Technical Support.
The command cannot be accepted. After a while, execute the
same command. 00EE 2EE7 Executing CMDRJE
An internal error occurred in the pool operation. FEEC 2EE7 Executing CMDRJE
Call HP Technical Support.
Table 78 SSB codes that are returned by raidcom rename pool command
raidcom rename pool
Description Error code Executing/
Async Error message
SSB2 SSB1
The value of pool ID is out of range. 6000 2E00 Executing CMDRJE
The pool name cannot be changed because the pool
configuration is being changed. 6016 2E10 Executing CMDRJE
Invalid pool ID. 6000 2E20 Executing CMDRJE
Error messages and error codes 257