HP XP7 Storage - Manual (Page 34)

Figure 14 Configuration for multiple networks
(5) HORCM_LDEV
The HORCM_LDEV parameter is used for specifying stable LDEV# and Serial# as the physical
volumes corresponding to the paired logical volume names. Each group name is unique and
typically has a name fitting its use (for example, database data, Redo log file, UNIX file). The
group and paired logical volume names described in this item must also be known to the remote
server.
•
dev_group: This parameter is the same as HORCM_DEV parameter.
•
dev_name: This parameter is the same as HORCM_DEV parameter.
•
MU#: This parameter is the same as HORCM_DEV parameter.
•
Serial#: This parameter is used to describe the Serial number of RAID box. For XP7 Storage,
set the number to which 300,000 is added to the serial number.
•
CU:LDEV(LDEV#): This parameter is used to describe the LDEV number in the RAID storage
system and supports three types of format as LDEV#.
#dev_group dev_name Serial# CU:LDEV(LDEV#) MU#
oradb dev1 30095 02:40 0
oradb dev2 30095 02:41 0
◦ Specifying "CU:LDEV" in hex used by SVP or Web console Example for LDEV# 260 01:
04
◦ Specifying "LDEV" in decimal used by the inqraid command of RAID Manager Example
for LDEV# 260 260
◦ Specifying "LDEV" in hex used by the inqraid command of RAID Manager Example for
LDEV# 260 0x104
(6) HORCM_LDEVG
The HORCM_LDEVG parameter defines the device group information that the RAID Manager
instance reads. For details about device group, see
“LDEV grouping function” (page 72) .
34 RAID Manager software environment