HP XP7 Storage - Manual (Page 62)

Table 16 Relation between resource groups and command devices (continued)
Command
operations
using the
Out-of-Band
method Configuration change Reference Operating range Command
device Login user
Inoperable Operable Operable Can operate only in the
range of resource group CM20
20, and the shared ports
after logging in.
Operable Operable Operable Can operate only in the
range of resource group CM0 User 10
10 and 11, and the shared
ports after logging in.
Inoperable Operable Operable Can operate only in the
range of resource group CM10
10, and the shared ports
after logging in
.*
Inoperable Operable Operable Can operate only in the
range of resource group CM11
11, and the shared ports
after logging in
.*
Inoperable Operation authority
error Cannot log in. Nothing is displayed or the
operation authority error. CM20
Operable Operable Operable Can operate only in the
range of resource group CM0 User 20
20, and the shared ports
after logging in.
Inoperable Operation authority
error Cannot log in. Nothing is displayed or the
operation authority error. CM10
Inoperable Operation authority
error Cannot log in. Nothing is displayed or the
operation authority error. CM11
Inoperable Operable Operable Can operate only in the
range of resource group CM20
20, and the shared ports
after logging in.
* To use each resource group, the user must separately execute raidcom -login command. For details about raidcom
-login command, see HP XP7 RAID Manager Reference Guide.
As shown in the table above, the relation among users, command devices and operations of
resource groups are the following.
•
The range that can be operated by command device 0 (CM0) or Out-of-Band is the shared
range (AND) of resource groups that are allocated to each user and all resource groups.
•
The range that can be operated by command device 10 (CM10) is the shared range (AND)
of resource groups that are allocated to each user and resource group 10 that the command
devices are allocated.
Therefore, in the range of resource group 10 can be operated.
The following shows the example of the case that the execution results of the commands change
by the case of having or not having the authority of the operated resources, specifies only the
objects or specifies to the parameters.
When user has the authority using CL1-A, CL3-A and CL5-A ports, and CL1-A, CL2-A, CL3-A, CL4-A
and CL5-A ports are implemented in the system, executes the following command.
When only the objects are specified:
62 RAID Manager functions on the P9500 and XP7 Storage