HP XP7 Storage - Manual (Page 64)

When executing the configuration setting command, the following checks can be done depending
on the above two mode types.
•
Syntax check
This function checks if there is no syntax error in the specified command. This is executed
every time at the both line-by-line mode and transaction mode.
•
Context check
This function checks the consistency of one specified line in the script and the preceding lines
in the order from the top. This function is available only at the Transaction mode. For details
about context checking, see
“Context check” (page 65) .
•
Configuration check
Acquire the current configuration information to a configuration file, and then this function
checks whether the resources specified in the script (LDEVs, ports, or host groups) are configured
in the storage system or not. This function is available only at the transaction mode. For details
about context checking, see
“Configuration check” (page 70) .
The configuration setting command also has a execution option described in the following.
•
Precheck
Specify the checkmode precheck option. It operates checking only (it does not execute
processing even if no error is detected.) This can be specified at the both line-by-line mode
and transaction mode.
The following table shows the overview of execution modes and options of the configuration setting
command.
Table 17 Execution modes and options of the configuration setting command (line-by-line mode)
Remarks Command execution
with no error Configura-tion
check Context check Syntax check Command syntax
Default Executed Not executed Not executed Executed raidcom <action>
Check only Not executed Not executed Not executed Executed raidcom <action> -checkmode
precheck
Table 18 Execution modes and options of the configuration setting command (transaction mode)
Remarks Command
execution with no
error Configura-tion
check Context check Syntax
check Command syntax
Default Executed Not executed Executed Executed raidcom -zt <script file>
With configuration
check Executed Executed Executed Executed raidcom -zt <script file> -load
<work file>
Check only Not executed Not executed Executed Executed raidcom -zt <script file>
-checkmode precheck
With configuration
check Not executed Executed Executed Executed raidcom -zt <script file> -load <
work file> -checkmode precheck
Check only
64 RAID Manager functions on the P9500 and XP7 Storage