HP XP7 Storage - Manual (Page 264)

Table 81 SSB codes returned by raidcom add snapshot (continued)
raidcom add snapshot
Description Error code Executing/Async Error message
SSB2 SSB1
A Fast Snap or Snapshot pair cannot be created because
the Thin Provisioning V-VOL in capacity expanding is
specified as the P-VOL of a Fast Snap or Snapshot pair. 0041 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair cannot be created because
the Thin Provisioning V-VOL that is discharging zero data
is specified as the P-VOL of a Fast Snap or Snapshot pair. 0042 2E10 Executing CMDRJE
A pair cannot be created because the P-VOL of a
Continuous Access Synchronous pair is specified as the
S-VOL of a Fast Snap or Snapshot pair. 0045 2E10 Executing CMDRJE
A pair cannot be created because the S-VOL of a
Continuous Access Synchronous pair is specified as the
S-VOL of a Fast Snap or Snapshot pair. 0046 2E10 Executing CMDRJE
The command ends abnormally because the Business Copy
pair is being resynchronized when the volume is shared 0049 2E10 Executing CMDRJE
between the P-VOL of a Fast Snap/Snapshot pair and the
P-VOL of a Business Copy pair.
The command ends abnormally because the Business Copy
pair status is other than PSUS when the volume is shared 004A 2E10 Executing CMDRJE
between P-VOL of a Fast Snap/Snapshot pair and the
S-VOL of a Business Copy pair.
The operation cannot be performed because the Quick
Restore is being operated on the specified Business Copy
P-VOL. 004E 2E10 Executing CMDRJE
A pair operations cannot be performed because the volume
using 2 mirrors included in the 3DC multi-target 0051 2E10 Executing CMDRJE
configuration, 3DC cascade configuration or 3DC delta
resync configuration by the 3 Continuous Access Journal
sites is specified.
A Fast Snap pair cannot be created because the pair status
of all Fast Snap pairs sharing the specified P-VOL is PSUE. 0052 2E10 Executing CMDRJE
A Fast Snap pair cannot be operated because the virtual
storage machine of the P-VOL is different from the virtual
storage machine of the S-VOL. 005B 2E10 Executing CMDRJE
A Fast Snap pair cannot be operated because changing
the model and the serial number in the virtual storage
machine of the specified P-VOL is in progress. 005C 2E10 Executing CMDRJE
A Fast Snap pair cannot be operated because changing
the model and the serial number in the virtual storage
machine of the specified S-VOL is in progress. 005D 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair with the specified consistency
group number cannot be created due to one of the
following reasons: 2300 2E10 Executing CMDRJE
•
The specified consistency group number is used by the
Business Copy.
• The number of pairs that can be defined in a consistency
group exceeds the maximum.
•
The pair created by using the same P-VOL already exists
in the specified consistency group.
264 Troubleshooting