HP XP7 Storage - Manual (Page 286)

Table 100 SSB codes that are returned by raidcom modify port -port_speed command (continued)
raidcom modify port -port_speed
Description Error code Executing/
Async Error message
SSB2 SSB1
The other than "P-to-P (point to point)" cannot be specified when
specifying a topology of the package for Fibre Channel over
Ethernet. 05A7 B955 Executing CMDRJE
The command device being used at the local RAID Manager
exists under the port. 1039 B955 Executing CMDRJE
The program product is not installed. 104F B955 Executing CMDRJE
Invalid host speed is set for 4Gbps fibre adapter. The available
host speeds are AUTO, 1G, 2G, and 4G only. 113D B955 Executing CMDRJE
Invalid host speed is set for 8Gbps Fibre Adapter. The available
host speeds are AUTO, 2G, 4G, and 8G only. 113F B955 Executing CMDRJE
The other than "10G" cannot be specified when specifying a
host speed of the package for Fibre Channel over Ethernet. 11A5 B955 Executing CMDRJE
Invalid host speed is set for 16Gbps Fibre Adapter. The available
host speeds are AUTO, 2G, 4G, and 8G only. 11AE B955 Executing CMDRJE
Topology FC-AL and 16G as the host speed are not supported
for the 16Gbps fibre adapter. 12AF B955 Executing CMDRJE
Table 101 SSB codes that are returned by raidcom modify port -port_attribute command
raidcom modify port -port_attribute
Description Error code Executing/
Async Error message
SSB2 SSB1
Invalid package 8404 2E00 Executing CMDRJE
The operation cannot be done because another application, for
example Remote Web Console and SVP, is used. 8001 2E10 Executing CMDRJE
The specified port is blocked. 8400 2E10 Executing CMDRJE
There is a pair for Continuous Access Synchronous/Continuous
Access Journal that is used the specified port. 8402 2E10 Executing CMDRJE
There is a pair for Continuous Access Synchronous/Continuous
Access Journal that is used the specified port. 8403 2E10 Executing CMDRJE
The storage system is in the state of start-up. Wait for a while,
then retry the operation. 800D 2E11 Executing CMDRJE
The specified port is not installed. 8400 2E20 Executing CMDRJE
There is a path for Continuous Access Synchronous/Continuous
Access Journal in the specified port. 8403 2E30 Executing CMDRJE
There is an external VOL path in the specified port. 8406 2E30 Executing CMDRJE
There is a path for Continuous Access Synchronous/Continuous
Access Journal in the specified port. 8407 2E30 Executing CMDRJE
There is a path for Continuous Access Synchronous/Continuous
Access Journal in the specified port. 8408 2E30 Executing CMDRJE
An LU path has been defined. 8409 2E30 Executing CMDRJE
An internal error occurred. 84FC 2ED0 Executing CMDRJE
286 Troubleshooting