HP XP7 Storage - Manual (Page 252)

Table 72 SSB codes that are returned by raidcom modify ldev -status blk command (continued)
raidcom modify ldev -status blk
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified LDEV is used as a Compatible FlashCopy
relationship. 0003 2E10 Async Get Command Status
The specified LDEV is used as a Fast Snap or Snapshot pair. 0004 2E10 Async Get Command Status
The specified LDEV is used as a system disk. 0008 2E10 Async Get Command Status
LDEV is not installed, or LDEV is not in the state of Normal. 0011 2E10 Executing CMDRJE
The specified LDEV is used at the concurrent copy or XRC. 0012 2E10 Async Get Command Status
The operation cannot be done because LDEV is now expanding. 0009 2E11 Async Get Command Status
The operation cannot be done because the virtual disk space is
blocked. 001E 2E11 Async Get Command Status
The specified LDEV is used in another operation. 0053 2E11 Executing CMDRJE
The parity group or the external group to which the specified
LDEV belongs is used in another operation. 0153 2E11 Executing CMDRJE
The operation cannot be done because the internal processing
is in progress. 8004 2E11 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The specified LDEV is not installed. 0000 2E20 Execution CMDRJE
The specified LDEV is used as a Thin Provisioning. 000A 2E30 Async Get Command Status
The specified LDEV is used as a pool volume. 000E 2E30 Async Get Command Status
It is used as a journal. 000F 2E30 Executing CMDRJE
The specified LDEV is used as a reserved volume of Auto LUN
V2. 0014 2E30 Async Get Command Status
Volume Security for Mainframe is set to the specified LDEV. 001A 2E30 Async Get Command Status
It is used as a remote command device. 001C 2E30 Async Get Command Status
It is a volume that the Data Retention is set. 004E 2E30 Async Get Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device. 004E 2E30 Async Get Command Status
It is used as a command device that is used at extended
consistency group. 0060 2E30 Async Get Command Status
THP volume that is not in the blocked state is included in the THP
volume associated with a pool that the pool volume is belongs
to. 0061 2E30 Async Get Command Status
Maintenance work cannot be performed because the target
LDEV is a ESAM Quorum disk. 0001 2E31 Async Get Command Status
LDEV cannot be blocked because there is no connection path
to the normal external path. 0017 2E31 Async Get Command Status
An internal error occurred. 0A18 2EE8 Async Get Command Status
252 Troubleshooting