HP XP7 Storage - Manual (Page 288)

Table 104 SSB codes that are returned by raidcom modify host_grp command (continued)
raidcom modify host_grp
Description Error code Executing/
Async Error message
SSB2 SSB1
The host group ID exceeds the maximum. 0956 B958 Executing CMDRJE
The program product is not installed. 0957 B958 Executing CMDRJE
The specified host group is not installed. 0959 B958 Executing CMDRJE
The command device being used at the local RAID Manager
exists under the host group. B9F9 B9F9 Executing CMDRJE
Table 105 SSB codes that are returned by raidcom disconnect path command
raidcom disconnect path
Description Error code Executing/
Async Error message
SSB2 SSB1
The path group is out of the enabled range. 4500 2E00 Executing CMDRJE
The value of specified port is invalid. 8400 2E00 Executing CMDRJE
The specified external path has already disconnected the path,
or is in the process of checking path. 4301 2E10 Async Get Command Status
The target LDEV is blocked. 001B 2E11 Async Get Command Status
The path for the specified external path is in the state of
disconnected. 4000 2E11 Async Get Command Status
This command cannot be operated due to one of the following
reasons: 4302 2E11 Async Get Command Status
•
All the paths to the external volumes are blocked.
• There will be no normal paths.
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
There is no specified external volume. 4100 2E20 Executing/Async Get Command Status
CMDRJE
There is no connection path to an external volume. 4300 2E20 Executing/Async Get Command Status
CMDRJE
WWN is not registered. 4400 2E20 Executing CMDRJE
There is no path group. 4500 2E20 Executing CMDRJE
external_wwn is not defined. 4500 2E20 Executing CMDRJE
Online from the mainframe host. 001E 2E30 Async Get Command Status
The attribute of a port is not External(ELUN). 8400 2E30 Executing CMDRJE
The command cannot be accepted. After a while, execute the
same command. 00EE 2EDA Executing CMDRJE
An internal error occurred by the operation of a path for an
external path. 0905 2EDA Async Get Command Status
Call HP Technical Support.
288 Troubleshooting