HP XP7 Storage - Manual (Page 251)

Table 71 SSB codes that are returned by raidcom modify ldev -status nml command (continued)
raidcom modify ldev -status nml
Description Error code Executing/
Async Error message
SSB2 SSB1
LDEV is not blocked. 0010 2E10 Executing CMDRJE
The specified LDEV is a CC/XRC attribute device. 0012 2E10 Async Get Command Status
The specified LDEV is not formatted after it is used as the journal
volume. 001E 2E10 Async Get Command Status
The operation cannot be done because LDEV is not expanding. 0009 2E11 Async Get Command Status
The operation cannot be done because the virtual disk space is
blocked. 001E 2E11 Async Get Command Status
The specified LDEV is used in another operation. 0053 2E11 Executing CMDRJE
The parity group or the external group to which the specified
LDEV belongs is used in another operation. 0153 2E11 Executing CMDRJE
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool volume. 6006 2E11 Async Get Command Status
The operation cannot be done because the internal processing
is in progress. 8004 2E11 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The specified LDEV is not installed. 0000 2E20 Executing CMDRJE
The specified LDEV is used as a Thin Provisioning. 000A 2E30 Async Get Command Status
The specified LDEV is used as a pool volume. 000E 2E30 Async Get Command Status
The specified LDEV is used as a reserved volume of Auto LUN. 0014 2E30 Async Get Command Status
Volume Security for Mainframe is set to the specified LDEV. 001A 2E30 Async Get Command Status
The specified LDEV cannot be restored because the shredding
or the formatting operation has not been performed. 002C 2E30 Async Get Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device. 004E 2E30 Async Get Command Status
LDEV cannot be restored because there is no connection path
to the normal external path. 0017 2E31 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EE8 Executing CMDRJE
Table 72 SSB codes that are returned by raidcom modify ldev -status blk command
raidcom modify ldev -status blk
Description Error code Executing/
Async Error message
SSB2 SSB1
It exceed the range of LDEV number. 0000 2E00 Executing CMDRJE
The specified LDEV is used as a pair of Business Copy/Fast
Snap/Snapshot/Auto LUN V2 or a relationship of Compatible
FlashCopy/Compatible FlashCopy SE. 0000 2E10 Async Get Command Status
The specified LDEVd is used for a pair of Continuous Access
Synchronous or Continuous Access Journal. 0001 2E10 Async Get Command Status
Error messages and error codes 251