HP XP7 Storage - Manual (Page 245)

Table 62 SSB codes that are returned by raidcom add journal command (continued)
raidcom add journal
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified volume is a volume of Just in Time (On-demand)
function. 0067 2E30 Executing
Async
CMDRJE
Get Command Status
The specified volume cannot be used as a journal volume
because it is used by Parallel Access Volumes. 0068 2E30 Async Get Command Status
The resource group ID of the specified volume cannot be
registered because the resource group ID is different from the 0070 2E30 Executing
Async
CMDRJE
Get Command Status
resource group ID of the other journal volume in the specified
journal group.
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Executing
Async
CMDRJE
Get Command Status
The specified LDEV cannot be used as a journal volume because
the size of the LDEV is less than the minimum capacity of journal
volume. 0084 2E30 Async Get Command Status
The operation cannot be performed because the specified volume
is not the Thin Provisioning V-VOL. 0086 2E30 Executing
Async
CMDRJE
Get Command Status
The command cannot be accepted. After a while, execute the
same command. 08E6 2EE4 Executing CMDRJE
An internal error occurred. 50EE 2EE4 Executing CMDRJE
Call HP Technical Support. Async Get Command Status
An internal error occurred. FEEC 2EE4 Executing CMDRJE
Call HP Technical Support. Async Get Command Status
The specified parameter is invalid. Check the HP XP7 RAID
Manager Reference Guide. 5002 2EF3 Executing CMDRJE
Table 63 SSB codes that are returned by raidcom modify journal command
raidcom modify journal
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified volume capacity is too small. 0023 2E00 Executing CMDRJE
The specified path block watch time exceeds the range. 500B 2E00 Executing CMDRJE
The specified MP Blade ID is invalid. 8301 2E00 Executing CMDRJE
The specified volume is not installed or cannot be used. 0011 2E10 Executing CMDRJE
The specified operation failed because the journal or mirror is
not in the operable status. 5000 2E10 Executing CMDRJE
The specified operation failed because the mirror of journal is
not in the operable status. 5006 2E10 Executing CMDRJE
The specified MP Blade is blocked. 8300 2E10 Executing CMDRJE
The operation cannot be done because it is in the state of
start-up. 800B 2E11 Executing CMDRJE
The specified journal ID is not registered. 5000 2E20 Executing CMDRJE
Error messages and error codes 245