HP XP7 Storage - Manual (Page 130)

Executed command Description Operation overview Step
raidcom add ldev -pool {<pool ID#> |
<pool naming> | snap} -ldev_id <ldev#> Specify pool and create LDEV (V-VOL). Creating LDEV
(V-VOL) 15
-capacity <size> [-emulation <emulation
type>][-location <lba>] [-mp_blade_id
<mp#>]
raidcom modify ldev -ldev_id <ldev#>
-ldev_name <ldev naming> Create nickname for created LDEV (V-VOL).
This operation is arbitrary.
Creating LDEV
(V-VOL) nickname
(arbitrary) 16
raidcom modify ldev -ldev_id <ldev#>
-mp_blade_id <mp#> Set MP blade of created LDEV (V-VOL). Setting MP blade of
LDEV (V-VOL) 17
raidcom get ldev -ldev_id <ldev#> … [-cnt
<count>] [-key <keyword>] Display information of created LDEV
(V-VOL) and confirm the result of executing
the command. Displaying LDEV
(V-VOL) information 18
raidcom add lun -port <port> [host group
name] -ldev_id <ldev#> [-lun_id <lun#>] Specify port, map LDEV to LUN and create
an LU path. Creating LU path 19
raidcom get lun -port <port> [<host group
name>] Display LU path information and confirm
the result of executing the command. Displaying LU path
information 20
raidcom monitor pool -pool {<pool ID#> |
<pool naming>} -operation start Start the performance monitoring of a pool
for Smart Tiers. Starting performance
monitoring of a pool
for Smart Tiers. 21
raidcom monitor pool -pool {<pool ID#> |
<pool naming>} -operation stop Stop the performance monitoring of a pool
for Smart Tiers. Stopping
performance 22
monitoring of a pool
for Smart Tiers.
raidcom reallocate pool -pool {<pool ID#>
| <pool naming>} -operation <type> Perform instruction of reallocation of pool
for Smart Tiers. Instructing
reallocation of pool
for Smart Tiers 23
Script examples
The following shows the script examples of virtual volume (Smart Tiers) operation.
Figure 38 Script examples of virtual volume operation (Smart Tiers) (1/3)
130 Provisioning operations with RAID Manager