HP 3PAR Service Processors - Manual (Page 24)

Changing the Transfer Media
Use this option to alter the media that the SP uses for sending an event or alert data and related
files to a connection portal.
To change the transfer media in SPMAINT:
1.
From the SP Transfer Media submenu, enter 1 for Data Transfer, and then press Enter.
2. When the SP Transfer Media Configuration menu appears, enter E|e, M|m, or O|o, and then
press Enter. The SP Transfer Media submenu appears.
NOTE: The SP Transfer Media submenu may show additional items. Changed options appear
to the right of the current values.
3. Make any additional changes to the SP phone number and dial-in prefix as necessary.
4. When finished, enter A, and then press Enter to quit, save, and activate the new transfer media
settings.
Changing the Remote Operations Transfer Media
Use this option to alter the media the SP uses when conducting problem-solving activities and
diagnostics performed from a remote location.
To change the remote operations transfer media:
1.
From the SP Transfer Media submenu, enter 2 for Remote Operations, and then press Enter.
The SP Transfer Media Configuration menu for remote operations appears.
2. Enter E|e for Ethernet, M|m for modem, or O|o for off, and then press Enter.
The SP Transfer Media submenu appears.
NOTE: The SP Transfer Media submenu may show additional items. Changed options appear
to the right of the current values.
3. Make any additional changes to the SP phone number and dial-in prefix, if applicable.
4. When task is complete, enter A, and then press Enter to quit, save, and activate the new
remote operations transfer media settings.
24 Network Configuration