HP 3PAR Service Processors - Manual (Page 29)

3. On the Configure Mailhost menu, edit the IP Address and Mailhost Domain Name fields as
necessary.
4. Click Update Mailhost Configuration to apply the new settings.
5. Click Return to Setup Menu to return to the Notification Maintenance Utilities menu.
Editing the Sites Table
The Sites table is a list of configured customer sites. This table shows the site name, site number,
and time zone for each site. Use the Editing Sites Table option on the Notification Maintenance
Utilities menu to edit information for currently defined sites or to add additional sites to the table.
Adding a Site
To add a new site to the Sites table:
1.
In the left navigation pane of the SPOCC menu, click Setup.
2. Under Notification Maintenance Utilities, click the Edit Sites Table option.
The Configured Sites for Local Notification screen appears.
3. On the Configured Sites for Local Notification menu, click the Add Additional Site option.
The Add Site Record screen appears.
4. On the Add Site Record menu, enter a site number and site name, and choose a timezone
name from the list.
5. Click Add Site to configure the new site.
6. Click Return to Setup Menu to return to the Notification Maintenance Utilities menu.
Editing the Product Table
The Product table is a list of installed storage systems where the SP resides. During installation
activities, new storage systems and other equipment are automatically added to this table. However,
they are not deleted automatically as part of a deinstallation process. Therefore, it is necessary to
update this table after deinstalling a storage system or SP. Deleting an item from this table also
deletes all notification records for that system.
Adding an Entry to the Product Table
Under normal circumstances, it is not necessary to manually add an item to the Product table. New
storage systems and SPs are automatically added to the Product table when they are installed.
To manually add a new item to the Product table:
1.
In the left navigation pane of the SPOCC menu, click Setup.
2. Under Notification Maintenance Utilities, click the Edit Product Table option.
The List Products for Notification screen appears.
3. On the List Products for Notification screen, click the Add Product option.
The Add Product Record screen appears.
4. On the Add Product Record screen:
a.
Choose a site from the site list and a system enter from the product list.
b. Enter the system serial number in the product serial field and description in the description
field.
c. Click Add Record to add the new item.
5. Click Return to Setup Menu to return to the Notification Maintenance Utilities menu.
Editing the Product Table Entries
To edit the site name, product serial number, or description for a currently installed storage system
or SP:
Editing the Sites Table 29