Boonton 4240 RF Power Meter - Manual (Page 41)

Boonton 4240 Series RF Power Meter
Function Description
Parameters Defaults
: Factor 5000
[0 to 6] : [0 to 9999]
the n/a n/a
calibration factor menu
AX POWER Power sensor's maximum [-99.99, 99.99] dBm 20
MIN POWER
Power sensor's minimum [-99.99, 99.99] dBm -75
power input
Linearity Factors. Seven upscale and downscale linearity factors are assigned to each power sensor. These values can be
viewed or edited by moving the cursor to the UPSCALE or DOWNSCALE command and pressing the <Enter> key. The
instrument will sequence through the linearity factors by pressing the up/down arrow keys. If a value is to be edited, scroll to
the desired linearity factor, use the right arrow key to move the cursor to the first digit in value field and then use the up/down
arrow keys to increment/decrement the number. Set the remaining digits in the same manner. If another value needs to be
changed, move the cursor back to the range field and use the up/down arrow keys to display the next value to be modified.
Press the <Enter> key when all of the changes have been entered.
FREQUENCY Calibration Factors. Up
s can be entered for each power sensor.
Position the cursor to the FREQ C.F. com o the Cal Factor menu. A sample of the
isplay is shown in Figure 3-17 and an explanation of the commands is shown in Table 3-9.
C A L
DATE
Calibration date MM/DD/YY 01/01/01
Where:
MM = 01 to 12
DD = 01 to 31
YY = 00 to 99
PSCALE Upscale linearity factors Range U
DOWNSCALE
Downscale linearity factors Range : Factor 0
[0 to 6] : [-999 to 999]
REQ C.F. Brings the instrument to F
MAX FREQ
Power sensor's maximum 0, 100.00 GHz 18
frequency
MIN FREQ
Power sensor's minimum 0, 100.00 GHz 0.03
frequency
M
to 60 sensor freque cy calibration factor
mand. Press the <Enter> key to advance t
n
d
R T N F R E Q
0 > 0 0 0 . 0 5 + 0 0 . 0 0
1 - 0 0 . 0 0 0 1 . 0 0 3
- . 2 0 0 2 . 0 0 0 0 0 6
Fi r - uency Cal Facto e Display gu e 3 17. Freq r M nu
Getting Started
3-17