Boonton 4240 RF Power Meter - Manual (Page 68)

Boonton 4240 Series RF Power Meter
*OPT?
Description: Return the status of Channel 1 and Channel 2 followed by a list of installed options.
Syntax: *OPT?
Returns: <f1, f2, f3, f4, opt1, opt2, …> : f1 – Chan 1 installed?, f2 – Chan1 sensor present?, f3 – Chan 2
installed?, f4 – Chan 2 sensor present?, opt1, opt2, etc. (option list may be empty).
*RST
Description: Set the instrument to a known “default” configuration. Set measurements to STOP. Set the sensor
et flag to FALSE, set the SCPI file over-write permission to FALSE, turn the
r output OFF and clear the error queues. System communication parameters are
s are set their default values (See Table 3-3,
RE
ng
STB register bit goes true, an SRQ will be generated. No SRQ can be generated for that condition
enerally summary bits, which are
l OR of the enabled bits from other registers. See the *STB command for bit
yntax:
Argument: <numeric value> = 0 to 255
temperature offs
internal Calibrato
not changed. Instrument measurement function
Initialized Parameters).
Syntax: *RST
gument: None Ar
*S
Description: Set or return the mask value in the Service Request Enable Register. This value is used to enable
particular bits for generating a service request (SRQ) over the GPIB when certain conditions exist
in the Status Byte register. When a mask bit in the SRE Register is set, and the correspondi
if the mask bit is clear. The bits in the Status Byte register are g
the logica
assignments.
S *SRE <numeric value>
Remote Operation
5-8