Boonton 4240 RF Power Meter - Manual (Page 93)

Boonton 4240 Series RF Power Meter
5.5.13 SYSTem Subsystem
T Tem group o mmands is used to control system-level functions not directly related to instrument measurement
perform nce. SYSTem ommands are used to return error codes or messages from the power meter error queue, control
figure communication parameters for the GPIB.
he SYS f co
a c
hardware features and con
Syntax: SYSTem:BEEP[:ENABle] <Boolean>
Argument: <Boolean> = { 0, 1, OFF, ON }
ed
Description:
Syntax:
YSTem:COMMunicate:GPIB:ADDRess
or return the GPIB bus address.
Argument:
YSTem:COMMunicate:GPIB:EOI
Description: Set or return the status of the GPIB EOI .
SYSTem:COMMunicate:GPIB:EOI <Boolean>
n
Description: Set or return the GPIB Listen end-of-string terminator .
Syntax: SYSTem:COMMunicate:GPIB:LISTen <character data>
<character data> = {LF, CR, CRLF, EOIONLY}
SYSTem:BEEP[:ENABle]
Description: Set or return the status of the audible keyboard beeper.
SYSTem:BEEP:IMM iate
Causes the system to emit an audible beep. Command only; does not respond to a query.
SYSTem:BEEP:IMMediate
Argument: None
S
Description: Set
Syntax: SYSTem:COMMunicate:GPIB:ADDRess <numeric value>
<numeric value> = 1 to 30
S
Syntax:
Argument: <Boolean> = { 0, 1, OFF, ON }
SYSTem:COMMunicate:GPIB:LISTe
Argument:
Remote Operation
5-33