Boonton 4240 RF Power Meter - Manual (Page 92)

Boonton 4240 Series RF Power Meter
STATus:QUEStionable:CALibration:ENABle
Description: Sets or returns the Questionable Calibration Enable register, which contains the bit mask that
Calibration Event register will be reported in the
nable Condition register. If any bit is 1 in
the Questionable Calibration Enable register and its corresponding Questionable Calibration Event
bit is true, the Questionable Calibration summary bit will be set.
Syntax: STATus:QUEStionable:CALibration:ENABle <numeric value>
TATus:QUEStionable:CALibration:EVENt?
Description: Returns the current contents of the Questionable Calibration Event register then resets the register
ster contains the latched events from the
the Questionable Calibration status
:CALibration:EVENt?
Returns: 16-bit register value (0 to 65535)
e Questionable Calibration
ransition filter causes a 1 to 0 (negative) transition in the
corresponding bit of the Questionable Calibration Condition register to cause a 1 to be written in
the associated bit of the Questionable Calibration Event register.
nable:CALibration:NTRansition <numeric value>
TATus:QUEStionable:CALibration:PTRansition
Description: Set or return the value of the positive transition filter bit mask for the Questionable Calibration
status group. Setting a bit in the positive transition filter causes a 0 to 1 (positive) transition in the
corresponding bit of the Questionable Calibration Condition register to cause a 1 to be written in
the associated bit of the Questionable Calibration Event register.
Syntax:
STATus:QUEStionable:CALibration:PTRansition <numeric value>
Argument: <numeric value> = 0 to 65535
Returns: 16-bit register value (0 to 65535)
defines which true conditions in the Questionable
Questionable Calibration Summary bit of the Questio
Argument: <numeric value> = 0 to 65535
Returns: 16-bit register value (0 to 65535)
S
value to 0. The Questionable Calibration Event regi
Questionable Calibration Condition register as specified by
group’s positive and negative transition filters.
Syntax: STATus:QUEStionable
STATus:QUEStionable:CALibration:NTRansition
Description: Set or return the value of the negative transition filter bit mask for th
status group. Setting a bit in the negative t
Syntax: STATus:QUEStio
Argument: <numeric value> = 0 to 65535
Returns: 16-bit register value (0 to 65535)
S
Remote Operation
5-32