4 display subsystem, Display:active, Display:clear – Boonton 4240 RF Power Meter User Manual
Page 75: Display:lin:resolution, Display:log:resolution, Display:label:mode, 4 display subsystem -15, Display:active[?] -15, Display:clear -15, Display:lin:resolution -15
Boonton 4240 Series RF Power Meter
5.5.4 DISPlay Subsystem
Syntax: DISPlay:ACTive <numeric value>
Argument:
<numeric value> = 1 to 2
n:
for CH1 and CH2. Clears averaging filters to empty. Does NOT clear errors.
yntax:
ISPlay:LIN:RESolution
on:
e display resolution for linear power and voltage readings. The number of
s displayed is equal to the argument. This command also sets the resolution of
rned in remote mode.
c value>
t:
er and voltage readings. The number of
is command also sets the resolution of
ISPlay:LABel:MODE
Description:
Turns on/off the user message display mode enabling the user to place text messages on the front
panel display.
Syntax:
DISPlay:LABel:MODE
<Boolean>
Argument:
<Boolean> = { 0, 1, OFF, ON }
The DISPlay group of commands is used to control the selection and presentation of measurements.
DISPlay:ACTive[?]
Description:
Set or return the active channel for talk commands.
DISPlay:CLEar
Descriptio
Clear all data buffers
S
DISPlay:CLEar
D
Descripti
Set or return th
significant digit
measurements retu
Syntax:
DISPlay[1|2]::LIN:RESolution
<numeri
Argumen
<numeric value>
= 3 to 5
DISPlay:LOG:RESolution
Description:
Set or return the display resolution for logarithmic pow
decimal places displayed is equal to the argument. Th
measurements returned in remote mode.
Syntax:
DISPlay[1|2]::LOG:RESolution
<numeric value>
Argument:
<numeric value>
= 1 to 3
D
Remote Operation
5-15