Boonton 4240 RF Power Meter - Manual (Page 98)

Boonton 4240 Series RF Power Meter
Ta d) ble 5-1. SCPI COMMAND SUMMARY (continue
CALCulate:MATH:ARGB
Set or return the second argument to be used for channel math
ALCulate:MATH:OPERator Set or return the channel math operator.
CALCulate:MODE Set/return
<character data> = NORMal, FAST, FILTered
CALCulate[1|2]:REFerence:COLLect etric measurement reference
level.
CALCulate[1|2]:REFerence:DATA ent reference level in dBm.
<numeric value> = -99.99 to +99.99 dBm
CALCulate[1|2]:REFerence:STATe
<Boolean> = 0, 1, OFF, ON
ALCulate[1|2]:STATe Enable currently selected channel allowing measurements to be
= DBM, Watts, Volts,
DBV, DBMV, DBUV
ALibration[1|2]:AUTOcal Start auto calibration with internal calibrator.
ALibration[1|2]:FIXedcal Start fixed calibration with internal calibrator.
ALibration[1|2]:ZERO Start zero process.
ISPlay:ACTive Set/return the active channel for talk commands.
ISPlay:CLEar Clear measurement data and display.
ISPlay:LIN:RESolution Set number of significant digits for linear displays and remote
ote return
values. <numeric value> = 1 to 3
ISPlay:LABel:MODE Enables/disables the user message display.
<alphanumeric value> = A to Z, a to z, 0 to 9 ! @ # $ % ^ & *
[ ] ? / < > : .
abel field.
<alphanumeric value> = A to Z, a to z, 0 to 9 ! @ # $ % ^ & *
operations.
CALCulate:MATH:DATA?
Returns the channel math result.
C
remote measurement mode
Set the current reading to be the ratiom
Set or return the ratiometric measurem
Set or return the ratiometric measurement mode state.
C
made. <Boolean> = 0, 1, OFF, ON
CALCulate[1|2]:UNITs
Change channel units. <character value>
C
C
C
D
D
D
return values. <numeric value> = 3 to 5
DISPlay:LOG:RESolution Set
number of decimal places for log displays and rem
D
<Boolean> = 0, 1, OFF, ON
DISPlay:Label:TEXTA
Displays a text message in the first label field.
( ) _ - + = { }
DISPlay:Label:TEXTB
Displays a text message in the second l
( ) _ - + = { } [ ] ? / < > : .
Remote Operation
5-38