DAVIS FMS 3.9.3 DriveRight (8186) - Manual (Page 136)

DriveRight FMS User's manual
Alarm Settings
Security Settings
GPS Settings
Back to Setup Menu | Default DriveRight Settings | Default DriveRight Settings - View/Set
Home | Getting Started | Quick Reference | Menu Commands | Troubleshooting
Timer Settings
Use this command to create default timer settings that can be used by all the vehicles in your
fleet.
To set Fleet default timer settings:
1. Select View/Set from the Default DriveRight Settings submenu from the Setup menu.
The Default DriveRight Settings dialog box is displayed.
2. Select the Timer Settings tab near the top of the dialog box. The timer options are
displayed.
3. Set the trip stop time in minutes. The trip stop time is the number of minutes that elapse
after a vehicle stops before the DriveRight stops recording trip data.
4. Set the Driver ID Logout Time in minutes. Use a logout time of "0" to never log out the
driver. The Driver ID Logout Time is the number of minutes that elapse after a vehicle stops
before the driver is logged out of the DriveRight.
124