Read tamper log, Set time and date – DAVIS FMS 3.9.3 DriveRight (8186) User Manual
Page 155
DriveRight FMS Help
To read the accident log:
1. Select Read Accident Log in the DriveRight Menu. The accident log is displayed.
See also:
Accident Log
Back to
|
Read Tamper Log
The Read Tamper Log command will download
Tamper Log
data from the connected DriveRight
device, convert it to a text file, and display it using MS Notepad. The Tamper Log holds the times
and dates when the driver disconnected the DriveRight or tried to change the DriveRight Settings.
Note: There must be a Settings PIN-Code in the unit to enable the logging of disconnect times.
To read the tamper log:
1. Select
Read Tamper Log in the DriveRight Menu. The tamper log is displayed.
See also:
Tamper Log
Back to
|
Set Time and Date
Use this command to set the time and date on a DriveRight device.
To set the time and date on a DriveRight:
1. Select
Set Time and Date from the DriveRight Menu. The Set Time and Date dialog
box is displayed.
143