DAVIS FMS 3.9.3 DriveRight (8186) - Manual (Page 178)

DriveRight FMS User's manual
Use this command to identify the DriveRight device receiving the new settings from the
SmartCard. The Identifcation settings control which DriveRight device gets the modifications
assigned in the Review Settings for SmartCard dialog box.
To select the identification settings:
1. Select Transfer to DriveRight from the SmartCard Menu.
2. Select Settings from the Transfer to DriveRight submenu. The Review Settings for
SmartCard dialog box is displayed. The Identification Tab is the default tab that is
displayed upon opening the dialog box.
3. Select the DriveRight device, ID, vehicle ID and default driver the device will be
programmed to recieve.
4. Click Set to save the Identification Settings, click Cancel to exit without saving the
settings, or click on another tab to make additional changes to the DriveRight default settings.
See also:
Calibration Settings
Unit Settings
Safety Settings
Timer Settings
Alarm Settings
Security Settings
GPS Settings
Back to Transfer to DriveRight | SmartCard Menu
Home | Getting Started | Quick Reference | Menu Commands | Troubleshooting
166