DAVIS FMS 3.9.3 DriveRight (8186) - Manual (Page 138)

DriveRight FMS User's manual
4. Set the Alarm Mode to On or Off. This controls audible alarm reporting by the DriveRight
device.
5. Enable "Warn if not Logged in" to have the DriveRight device give an audible alarm if the
vehicle is operated without the driver first entering his or her driver code.
6. Click OK to save the Alarm Settings, click Cancel to exit without saving the settings, or
click on another tab to make additional changes to the DriveRight default settings.
See also:
Unit Settings
Safety Settings
Timer Settings
Security Settings
GPS Settings
Back to Setup Menu | Default DriveRight Settings | Default DriveRight Settings - View/Set
Home | Getting Started | Quick Reference | Menu Commands | Troubleshooting
Security Settings
Use this command to create default DriveRight security settings.
126