Setup card, Allows you to, Smartcard setup card – DAVIS FMS 3.9.3 DriveRight (8186) User Manual
Page 174
DriveRight FMS User's manual
The SmartCard Download command allows you to download data from a SmartCard containing
data. To use this function:
1. Insert the card you which to download into the Desktop Reader.
Note: If you have not already done so, test the connection between the SmartCard Desktop
Reader by using the SmartCard Reader command in the Setup Menu.
2.
Select Download from the SmartCard menu. The information in the card is automatically
downloaded into the database for the assigned user and DriveRight, location, etc.
During the download process, the software could display any of the following status messages or
error messages. They include:
Data not properly downloaded from card.
Vehicle not assigned to the corresponding DriveRight device
If device settings don't match with the settings in the database.
If the card is pulled out in the middle of downloading.
Note: The FMS software always prompts the user to download trip data before it will allow other
information to be transferred onto the card. This ensures that the trip data is safely logged in the
database. Adding items to transfer back to the DriveRight will overwrite trip data.
Once download is complete, the dialog box closes.
Back to
|
|
Setup Card
162