DAVIS FMS 3.9.3 DriveRight (8186) - Manual (Page 162)

DriveRight FMS User's manual
5. If the settings in the CarChip you are adding are different from the default CarChip
settings in the database, the CarChip Default Settings dialog box is displayed. Click Yes to
configure the CarChip with the default settings or click No to use the existing CarChip Settings.
7. The Set Anomalous Vehicles dialog box displays. Select either Vehicle with standard
OBDII capabilities or one of the other choices and click OK to continue.
8. The Add CarChip Wizard - Safety Settings dialog box is displayed. This shows the
CarChip's speed band, braking, and acceleration thresholds. When you are satisfied with the
safety settings, click Next to continue.
9. The Add CarChip Wizard - Parameter/GPS Settings dialog box is displayed. This shows
the engine and vehicle performance parameters that CarChip logs and the sample interval rates
for each parameter. This dialog box also allows you to turn the GPS Setting on and off for a new
CarChip. The GPS Logging feature is available if the CarChip Fleet Pro (# 8246) is connected to
your computer. When you are satisfied with the parameter/GPS settings, click Next to continue.
10. The Miscellaneous Settings dialog box is displayed. The Miscellaneous Settings dialog
box allows you to set the CarChip's alarm volume (for CarChip Models # 8245, 8246 only) and
LED Status.
The Alarm Status options vary depending on the CarChip model currently connected to your
computer. If CarChip Fleet Pro (# 8246) is connected, three different alarm volumes (High,
Medium, Low) and the Disabled radio buttons are available. If a CarChip Fleet or CarChip Fleet
with Alarm (# 8245) is connected, the alarm option is limited to Medium and Disabled. The Alarm
setting only works with CarChip Fleet with Alarm (# 8245) and CarChip Fleet Pro (# 8246).
The LED Status is available for all CarChip models. If Enabled, the green LED on the CarChip
flashes when plugged into a vehicle and flashes continually when the vehicle is running. If
Disabled, the green LED does not flash while in the vehicle.
Click OK to continue.
11. The Review Settings For New CarChip dialog box is displayed. This dialog box allows
you to review the Identification , Safety , and Parameter/GPS and Miscellaneous settings for the
new CarChip one last time before you add it to the database.
150