DAVIS FMS 3.9.3 DriveRight (8186) - Manual (Page 167)

DriveRight FMS Help
2. Set the date by either clicking the month, day or year in the edit box and entering the new
information, or by clicking on the down arrow and selecting the date from the drop-down calendar.
3. Set the time by clicking on the hour, minute or second in the edit box and entering the
new time. You can also adjust the time settings up and down using the up and down arrows in the
edit box.
4. Click Set to change the time and date on the CarChip device or click on Cancel to exit
the dialog box without changing the settings.
Back to CarChip Menu
Home | Getting Started | Quick Reference | Menu Commands | Troubleshooting
Set CarChip LED
Use the CarChip LED Status dialog box to view or change the CarChip LED status
configuration. If enabled, the green LED on the CarChip flashes when plugged into a vehicle and
flashes continually when the vehicle is running. If disabled, the green LED does not flash while in
the vehicle.
To change the CarChip Status LED:
1. Select Set CarChip LED in the CarChip Menu. The CarChip LED dialog box is
displayed showing the current LED state for the CarChip.
155