Corporate structure, Corporate, Structure – DAVIS FMS 3.9.3 DriveRight (8186) User Manual
Page 143: As one of the ap, Menu, The corpo
DriveRight FMS Help
2.
Edit the labels used for digital input 1 and digital input 2. The following is a list of possible
labels used as digital inputs:
Seat belts
Headlights
Braking
Lights
Windshield wipers
Note: Depending on the selected digital input, extra setup between the DriveRight and the vehicle
may need to happen to monitor these digital inputs correctly. For Example: To make "Seat belts"
a digital input, locate a wire bundle underneath the driver's set, pick a wire from the bundle and
test it's voltage during buckling and buckling. Do this until you find the wire that goes from 0 to 12
volts when buckling and buckling and connect it to the green wire of the adapter cable supplied
with the DriveRight. Connecting other aspects of your vehicle to be monitored by the DriveRight
system varies.
3. Click
OK to save the changes or click Cancel to exit without saving the changes.
Back to
|
Corporate Structure
The Corporate Structure dialog box allows you to set up reporting structure for all the locations
listed in a database. The resulting location structure can be used as a tool for displaying the
Driver Safety Score Report, breaking up driver and fleet information based on locations and the
reporting structure.
To create and edit the corporate reporting structure:
1. Select
Corporate Structure from the Setup menu. The Corporate Structure dialog box
is displayed.
131