Carchip considerations, Carchip settings, Carchip – DAVIS FMS 3.9.3 DriveRight (8186) User Manual

Page 39: Settings, Dialog box, Led. the

Advertising

DriveRight FMS Help

 If a CarChip is assigned to a vehicle, the default driver of that vehicle will appear as the

driver on all downloaded data from that CarChip.

 If a CarChip is assigned to a driver, then all data downloaded from that CarChip will be

associated with that driver and the vehicle will be listed as UNKNOWN VEHICLE.

 If you just want to add a CarChip and you don’t yet have a vehicle or driver to assign, you

can select "UNKNOWN VEHICLE".

 Based on your specific situation, you should carefully consider the options before

assigning a CarChip to either a vehicle or driver.

 The

Add New CarChip

command opens a wizard that will guide you through the process

of adding CarChips. It will also allow you to add drivers and vehicles if they are not
already in the database.

Back to

CarChip Considerations

o If both a CarChip device and DriveRight console are installed in the same vehicle, you

will need to create two entries for the driver and two entries for the vehicle in the
DriveRight FMS database. Otherwise you will see duplicate trip data in your DriveRight
FMS reports.

o If you have multiple serial ports, you can connect CarChip to one serial port and

DriveRight to another. If you do not have multiple serial ports we recommend you buy a
serial switch box to switch between the two devices or a serial extension cord to make
plugging and unplugging the download cables more convenient.

o If you are using both CarChip and DriveRight devices, make sure both types of devices

use the same safety settings.

 Speed Band 3 in CarChip should match Speed Limit in DriveRight.

 Hard Braking in CarChip should match Decel Limit in DriveRight.