Carchip settings: restore, Restore – DAVIS FMS 3.9.3 DriveRight (8186) User Manual
Page 165
DriveRight FMS Help
7. Determine
whether
the
GPS feature is enabled for the CarChip and set the interval at
which the GPS data is logged. The GPS Logging feature is available for CarChip Fleet Pro
(#8246). Select On to turn on the GPS logging feature for the connected CarChip. Select Off to
turn off the GPS feature for the connected CarChip. A CarChip GPS/Wireless Interface Module
(#8251) and GPS Module (#8128) must be installed in a vehicle with each CarChip to log
CarChip GPS data.
The Estimated Logging Time box lists the approximate number of hours CarChip data can be
logged without the CarChip writing over the oldest data stored. The number of hours the CarChip
can log depends on the parameters selected, their selected logging intervals, whether or not GPS
logging has been enabled and the logging interval for the GPS feature.
8.
When you are finished, click Set to save any changes. Click Defaults to clear all
changes and display the original defaults, or click Close to exit without saving changes.
Back to
|
|
CarChip Settings: Restore
Use this command to update the CarChip device using settings stored in the database:
1. Select CarChip Settings:Restore from the CarChip Menu. The Restore CarChip Settings
dialog box is displayed.
2.
Select the desired CarChip or License Plate/ Driver Name from the drop down lists.
3.
Click Restore to save the selected settings to the CarChip, or click Cancel to exit without
changing the settings.
Back to
,
|
153