Set service alarms – DAVIS FMS 3.9.3 DriveRight (8186) User Manual
Page 157
DriveRight FMS Help
2.
You can now edit the vehicle's odometer reading.
3. Click
on
OK to update the odometer reading on the DriveRight unit or click on Cancel to
exit the dialog box without changing the settings.
Note: When you set the odometer DriveRight FMS updates the current odometer value of the
vehicle assigned to this DriveRight and also adds a new entry in the Odometer Logs Table.
Back to
|
Set Service Alarms
Note: Available for the DriveRight Trip 500 AL only.
Each vehicle needs a service check from time to time. With the Set Service Alarms option you
can specify the Odometer Readings on which the vehicle should go in for service. After defining a
Service Schedule you can assign it to a vehicle and load it into the DriveRight Trip 500AL using
the Set Service Alarms command in the DriveRight menu. As soon as any defined odometer
readings are reached, a warning signal is activated in the vehicle indicating the driver to bring his
vehicle in for a service check, or call his service center for an appointment.
To set a service alarm:
1. Select
Set Service Alarms from the DriveRight Menu. The Set Service Alarms dialog
box is displayed.
145