Vaisala HMP155 - Manual (Page 42)

USER'S GUIDE____________________________________________________________________
40 _______________________________________________________________ M210912EN-C
ERRS
Use the ERRS command to display probe error messages, see Table 15
on page 54.
Example:
>errs
No errors
>
VERS
Use the VERS command to display software version information.
Example:
>vers
HMP155 1.01
>
RESET
Use the RESET command to reset the device. The user port switches to
start-up output mode selected with SMODE command.
NOTE The RESET command returns the passive output version back to analog
output mode.
Example:
>reset
HMP155 1.00
>