Kenwood KDC-X8019BT - Manual (Page 12)

12 | KDC-X8019BT/ KDC-X8019BTL
USB device/ SD card Operation
Basic Operation
Playing USB device
• Connect a USB device
When connected, the source is switched
automatically and a song starts playing.
• Select USB source
Press the [SRC] button.
Select the “USB” display.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
Playing SD card
1
Press the Release button and drop open the
faceplate.
2
Detach the faceplate.
3
Hold the SD card with the label side up and the
notched section on the right, and insert it into
the slot until it clicks.
SD card
(commercially available)
4
Attach the faceplate.
5
Select SD source
Press the [SRC] button.
Select the “SD” display.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
Moving to the next folder
Press the [PRESET] button for at least 1 second.
Song Select
Press the [ 4] or [¢] button.
Fast Forwards or Fast Backwards
Hold down the [ 4] or [¢] button.
⁄
• No sound is output while playing audio file.
Pause and Play
Press the [ 38] button to pause or resume
playback.
Remove USB device
Select a source other than Pandora and iPod, and
the iPod can be removed safely.
Remove SD card
1
Press the Release button and drop open the
faceplate.
2
Detach the faceplate.
3
Push the SD card until it clicks and then remove
your finger from the card.
The card pops up so that you can pull it out
with your fingers.
4
Attach the faceplate.
SRC
4
MENU VOL
¢ 38
DISP PRESET
iPod
B64-4900-00_00_en.indd 12 11/12/28 12:04