Kenwood KDC-X8019BT - Manual (Page 14)

14 | KDC-X8019BT/ KDC-X8019BTL
USB and SD Setting
You can select following USB Setting items.
1
Select USB or SD source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”.
4
Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
“Settings”
“Skip Search” Sets the ratio of skip performed with <Skip
Search> (page 14).
“0.5%”/ “1%”/ “5%”/ “10%”
( : Factory setting)
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• The setting of “Skip Search” in <iPod Setting> (page
8) and that in <USB and SD Setting> (page 14) are
always the same. Changing the setting of one reflects
the other.
• This operation is effective only for the files registered in
the database created with KENWOOD Music Editor.
Skip Search
You can scroll up or down according to the number
of the selected Search items so that you can quickly
switch the display position.
1
Select USB or SD source
2 Enter File Search mode
Press the [MENU] button.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Music”
> item.
3
Enter Skip Search mode
Press the [PRESET] button for at least 1 second.
4
Search for music
Operation type Operation
Move between items Turn the [VOL] knob.
Select an item Press the [VOL] knob.
Skip Search Press the [DISP] or [iPod] button.
Keep pressing the button for 1 second or
longer skips songs at 10% irrespective of
the setting.
Sets the ratio of skip
performed
Press the [ 4] or [¢] button.
Return to previous item Press the [MENU] button.
After this step, see step 4 of <File Search> (page 13)
to select a song.
Cancelling the Skip Search
Press the [PRESET] button for at least 1 second.
⁄
• This operation is effective only for the files registered in
the database created with KENWOOD Music Editor.
• Set the ratio with “Skip Search” in <USB and SD Setting>
(page 14).
USB device/ SD card Operation
B64-4900-00_00_en.indd 14 11/12/28 12:04