Kenwood KDC-X8019BT User Manual
Page 47
English
|
47
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Enter Bluetooth mode
Press the [
] button.
✍
You can also select from “Settings” in Menu List
mode.
2
Enter Bluetooth device deletion mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
>
“Pairing”
>
“Device
Delete”.
“(name)” is displayed.
3
Select the Bluetooth device
Turn the [VOL] knob.
4
Delete the selected Bluetooth device
Press the [VOL] knob.
5
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
“Delete” is displayed.
6
Exit BT Settings mode
Press the [
] button.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, and SMS are also deleted.
Downloading the Phone Book
Download the phone book data from the cell-
phone to this unit so that you can use the Phone
Book of this unit.
To download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
⁄
• Setting on the cell-phone may be required.
• If no phone book data is found in the unit even after
the compete display, your cell-phone may not support
automatic download of phone book data. In this case, try
downloading manually.
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Enter Bluetooth mode
Press the [
] button.
✍
You can also select from “Settings” in Menu List
mode.
2
Select Bluetooth device selection mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Cell-phone
Select “BT Settings”
>
“Pairing”
>
“Phone
Selection”.
Audio player
Select “BT Settings”
>
“Pairing”
>
“Audio
Selection”.
3
Enter Bluetooth device selection mode
Press the [VOL] knob.
“(name)” is displayed.
4
Select the Bluetooth device
Turn the [VOL] knob.
5
Set up the Bluetooth device
Press the [VOL] knob.
“✱(name)” or “-(name)” is displayed.
“✱”: The selected Bluetooth device is busy.
“-”: The selected Bluetooth device is on standby.
“ “ (blank): The Bluetooth device is deselected.
6
Exit BT Settings mode
Press the [
] button.
⁄
• If a Bluetooth device is already selected, deselect it, and
then select a different one.
Next page
3
B64-4900-00_00_en.indd 47
11/12/28 12:04