Kenwood KDC-X8019BT - Manual (Page 42)

42 | KDC-X8019BT/ KDC-X8019BTL
DSP Setup
When Speaker network is set to 3 way
Item Setting overview
“CHANNEL LEVEL.
TWEETER / “L”
Tweeter Left
“CHANNEL LEVEL.
TWEETER” / “R”
Tweeter Right
“CHANNEL LEVEL. MID
RANGE” / “L”
Mid Range Left
“CHANNEL LEVEL. MID
RANGE” / “R”
Mid Range Right
“CHANNEL LEVEL.
WOOFER” / “L”
Woofer Left
“CHANNEL LEVEL.
WOOFER / “R”
Woofer Right
5 Set the value
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
Resetting of DTA Settings
You can reset the DTA-compensated values to the
factory settings.
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Reset DTA Setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Pro Setup”
> “DTA Settings” > “Reset
DTA Setting”.
4
Reset the DTA settings
Turn the [VOL] knob to select “YES”, and then
press the [VOL] knob.
Audio Preset Memory
Registering the value setup by Sound Control.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- Manual Equalizer Control (page 36)
- Car Type Selection (page 38)
- Speaker Setting (page 38)
- X’Over Setting (page 39)
- Listening Position Selection (page 40)
- Listening Position Fine Adjustments (page 40)
- Channel Level Fine Adjustments (page 41)
2
Enter Audio preset memory mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Pro Setup”
> “Preset” > “Memory”.
3 Select the number to put in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select a preset number.
4
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
“Memory Completed” is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
• Register 6 patterns of Audio Preset Memory.
• Preset number “1”:
When you press the Reset, all the sources will be the
setting value which is registered.
• Preset number “1” and “2”:
The memory cannot be erased by the Reset button.
• This function cannot be registered when the iPod
Equalizer set in <Preset Equalizer curve Select> (page 36).
B64-4900-00_00_en.indd 42 11/12/28 12:04