Kenwood KDC-X8019BT - Manual (Page 43)

English | 43
Audio Preset Recall
Recalling the sound setup registered by <Audio
Preset Memory> (page 42).
1 Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Audio preset recall mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Pro Setup”
> “Preset” > “Recall”.
3
Select the number to recall in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
4
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
“Recall Completed” is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
• The “User” of <Preset Equalizer curve Select> (page 36)
is changed to the value which was recalled.
• The Equalizer curve is changed to the value which was
recalled by the selected source.
B64-4900-00_00_en.indd 43 11/12/28 12:04