Kenwood KDC-X8019BT - Manual (Page 20)

20 | KDC-X8019BT/ KDC-X8019BTL
Getting Started of Bluetooth
Easy pairing function
1
Enter easy pairing mode
Press the [
] button for at least 1 second.
Any of the following is displayed depending on
Bluetooth device registration condition:
– “Searching”: When registering a Bluetooth device
for the first time.
– “(Bluetooth device name)”: When a Bluetooth
device has already been registered.
– “Device Full”: When maximum of five Bluetooth
devices have already been registered.
When registering a Bluetooth device for the
first time (Registering a Bluetooth device)
2
“Searching” is displayed.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
3
Select a Bluetooth device name
Turn the [VOL] knob and press it when the
desired item is displayed.
4
“Confirm Device” is displayed.
If “Pairing Success” is displayed, proceed to step 7.
If “PIN code is displayed, proceed to steps 5.
If “*** NG” is displayed, press the volume knob.
Proceed to steps 4.
5
Input the PIN code
1. Turn the [VOL] knob and press it when the
desired item is displayed.
Select the digit.
2. Turn the [VOL] knob to select the numbers,
and then press the [VOL] knob.
6
Transmit the PIN code
Press the [VOL] knob for at least 1 second.
If “Pairing Success” is displayed, registration is
completed.
When “Confirm Device” is displayed, confirm
connection with a Bluetooth device operation.
7
The receiver is connected to a Bluetooth
device, with “HF CONNECT” or “AUDIO
CONNECT” displayed, and exits the easy
pairing mode.
⁄
• If an error code is displayed during paring, see
<Troubleshooting Guide> (page 60).
When a Bluetooth device has already been
registered, or maximum of five Bluetooth
devices have already been registered/ selecting
a Bluetooth device
2 “(Bluetooth device name)” or “Device Full” is
displayed.
3 Select a Bluetooth device name
Turn the [VOL] knob.
✍ To register a new Bluetooth device, select
“Device Search”, then go to <When registering a
Bluetooth device for the first time>.
4
Press the [VOL] knob.
5
Select the profile for the device to connect
Turn the [VOL] knob.
✍ “HF” (HFP), “AUD” (A2DP), or “H&A” (HFP and A2DP)
indicates the corresponding profile.
6
Set up the Bluetooth device name
Press the [VOL] knob.
“✱H✱A (device name)”: The selected Bluetooth
device is busy.
“-H-A (device name)”: The selected Bluetooth
device is on standby.
“ “ (blank) (device name): The Bluetooth device is
deselected.
✍ If a Bluetooth device is already selected, deselect
it, and then select a different one.
✍ “H” (HFP) or “A” (A2DP) indicates the corresponding
profile.
7 Exit easy pairing mode
Press the [
] button.
Deleting the registered Bluetooth device
2
“(Bluetooth device name)” or “Device Full” is
displayed.
3
Select a Bluetooth device name
Turn the [VOL] knob.
4
Delete the selected Bluetooth device
Press the [VOL] knob for at least 2 seconds.
SRC VOL
B64-4900-00_00_en.indd 20 11/12/28 12:04