Kenwood KDC-X8019BT - Manual (Page 18)

18 | KDC-X8019BT/ KDC-X8019BTL
Tuner Operation
Basic Operation
Selecting Tuner source
Press the [SRC] button.
Select the “TUNER” display.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
Selecting the Receiving Band
Press the [PRESET] button for at least 1 second.
Pressing the button switches the receiving band
(FM, AM).
Selecting the Receiving station
Press the [ 4] or [¢] button.
✍ Details of the station selecting in operation are
set in the “Seek Mode of <Tuner Setting> (page
18).
Tuner Setting
You can select following Tuner Setting items.
1
Select Tuner source
2 Enter Menu List mode
Press the [MENU] button.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”.
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
“Settings”
“Seek Mode” Selects the tuning mode of the radio.
“Auto1”: Automatic search for a station.
“Auto2”: Search in order of the stations in the
Preset memory.
“Manual”: Normal manual tuning control.
“Auto Memory” Memorizes 6 stations with good reception
automatically.
Refer to <Auto Memory Entry> (page 19)
“Forced MONO” You can reduce the noise when stereo broadcasts
are received as monaural. (FM only)
“OFF”/ “ON”
( : Factory setting)
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Remarks
• Forced MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
Station Preset Memory
Putting a station in the memory.
1
Select the radio band and tune in a desired
radio station you wish to store in the preset
memory
2
Enter the Preset Memory mode
Press the [PRESET] button.
The “Preset List”, “Mixed Preset List”, and normal
display are displayed in order each time you press
this button.
3
Select the number to put in the memory
Turn the [VOL] knob and press [VOL] knob for
at least 2 seconds when the desired item is
displayed.
Select a preset number.
Display Overview
“-01”/ “01:” Preset number 1. (FM/ AM/ Mixed)
“-02”/ “02:” Preset number 2. (FM/ AM/ Mixed)
…
“-06”/ “06:” Preset number 6. (FM/ AM/ Mixed)
…
“-18” Preset number 18. (FM)
⁄
• You can register up to 18 FM stations and 6 AM stations.
Selecting “Mixed Preset List” allows you to register up
to six stations including FM and AM regardless of the
selected source.
SRC
4
VOL
¢
MENU PRESET
B64-4900-00_00_en.indd 18 11/12/28 12:04