Bluetooth setup – Kenwood KDC-X8019BT User Manual

Page 48

Advertising
background image

48

|

KDC-X8019BT/ KDC-X8019BTL

Bluetooth Setup

To download from the cell-phone manually

1

By operating the cell-phone, end the hands-free
connection.

2

By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
• During downloading:

“Downloading” is displayed.

• After completion of downloading:

“Completed” is displayed.

3

By operating the cell-phone, start the hands-
free connection.

To clear the downloading completion message

Press any button.

• Up to 500 phone numbers can be registered for each

registered cell-phone.

• Up to 32 digits can be registered for each phone number

along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type
of characters.)

• To cancel downloading of the phone book data, operate

the cell-phone.

Bluetooth device registration test

You can check whether a Bluetooth device can be
registered by operating this unit.

1

Enter Bluetooth mode
Press the [

] button for at least 1 second.

Search for a Bluetooth device starts with “Searching”
displayed.

2

Select the Bluetooth device to test
Turn the [VOL] knob to select Bluetooth device
name.

3

Enter BT test mode
Press the [VOL] knob for at least 1 second.
“BT Test Mode” is displayed.

4

Input the PIN code
1. Turn the [VOL] knob and press it when the

desired item is displayed.

Select the digit.
2. Turn the [VOL] knob to select the numbers,

and then press the [VOL] knob.

5

Transmit the PIN code
Press the [VOL] knob.
When pairing is completed successfully, a
connection test starts automatically.
When the connection test is completed, test results
are displayed on a function basis (“OK”: Enabled;
“NG”: Disabled).

Display

Description

“Pairing”

Registration in this unit

“HF Connect”

Hands-free phoning

“Audio Connect”

Audio playback

“PB Download”

Audio playback

6

Exit BT test mode
Press the [VOL] knob.

B64-4900-00_00_en.indd 48

11/12/28 12:04

Advertising