Kenwood KDC-X8019BT - Manual (Page 25)

English | 25
Calling a Number in the Call log
1
Enter Bluetooth mode
Press the [
] button.
2
Select the call log mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Outgoing Calls”, “Incoming Calls”, or
“Missed Calls”.
3
Select a name or phone number
Turn the [VOL] knob and press it when the
desired item is displayed.
✍ Switching between Display Modes
Press the [DISP] button.
Pressing this button each time switches between
name and telephone number.
4
Make a call
Press the [VOL] knob.
⁄
• The outgoing call list and the incoming call list, and the
missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.
Dial a Number
1
Enter Bluetooth mode
Press the [
] button.
2
Select the number dial mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Number Dial”.
3
Enter a phone number
1. Turn the [VOL] knob to select the numbers,
and then press the [VOL] knob.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select the digit.
2. Turn the [VOL] knob and press it when the
desired item is displayed.
Move to the next digit.
• Press the number ([1] – [0]), #([FM]), *([AM]), or
+([ ¢]) button on the remote controller.
✍ To erase the entered phone number digit
by digit:
Press the [
4] button on the remote
controller.
4
Make a call
• Press the [VOL] knob.
• Press the [DIRECT] button on the remote
controller.
⁄
• You can input max 32 digits.
B64-4900-00_00_en.indd 25 11/12/28 12:04