Kenwood KDC-X8019BT - Manual (Page 23)

English | 23
Operation of hands-free phoning
Receiving a Call
Answering a Phone Call
Press the [ ] button.
⁄
• The following operations disconnect the line:
- Insert a CD.
- Connect a USB device.
• The name of the calling party is displayed if it has already
been registered in the Phone Book.
Rejecting an Incoming Call
Press the [SRC] button.
During a Call
Disconnecting a Call
Press the [ ] or [SRC] button.
Switching to the Private Mode
Press the [ 38] knob.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate
your cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.
Call Waiting
Answering Another Incoming Call with the
Current Call Suspended
1
Press the [ ] knob.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Answer”.
Answering another Incoming Call after
Terminating the Current Call
Press the [ ] or [SRC] button.
Continuing the Current Call
1
Press the [ ] knob.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Reject”.
Answering the Waiting Call after Terminating
the Current Call
Press the [ ] or [SRC] button.
Switching between the Current Call and Waiting
Call
Press the [VOL] knob.
Each pressing of this knob switches the calling
party.
Other Functions
Clearing the Disconnection Message
Press the [ ] button.
“HF Disconnect” disappears.
SRC
4
VOL
¢ 38
MENU VOL DISP
B64-4900-00_00_en.indd 23 11/12/28 12:04