Kenwood KDC-X8019BT - Manual (Page 26)

26 | KDC-X8019BT/ KDC-X8019BTL
Operation of hands-free phoning
Making a call by voice dialing
You can make a voice call using the voice
recognition function of the cell-phone.
1
Enter Voice tag mode
Press the [VOL] button for at least 1 second.
“Voice Tag” is displayed.
2 Have the cell-phone recognize your spoken
word
Pronounce the name registered in the cell-
phone.
The recognized phone number (name) is displayed.
Exit the Voice tag mode
Press the [VOL] button for at least 1 second.
⁄
• If “No Support” is displayed, your cell-phone does not
support the voice recognition function.
• If “No Active device” is displayed, your cell-phone cannot
start voice recognition.
• If your voice cannot be recognized, a message is
displayed. Pressing the Volume knob allows you to retry
voice input.
• Audio sound is not output during voice recognition.
Registering to the Preset Dial Number
List
1
Select the phone number you wish to register
Select the phone number with reference to the
following:
- Calling a Number in the Phone Book (page 24)
- Calling a Number in the Call log (page 25)
- Dial a Number (page 25)
2
Enter Preset Memory mode
Press the [VOL] button for at least 1 second.
3 Select the preset number to put in the
memory
Turn the [VOL] knob.
Select the preset number.
4
Determine the preset number to put in the
memory
Press the [VOL] knob for at least 2 seconds.
Exit the Preset Memory mode
Press the [MENU] button.
Display of Phone Number type
(category)
The category items in the Phone Book are displayed
as follows:
Display Information
“GENERAL” / “ ” General
“HOME” / “ ” Home
“OFFICE” / “ ” Office
“MOBILE” / “ ” Mobile
“OTHER” / “ ” Other
B64-4900-00_00_en.indd 26 11/12/28 12:04