Kenwood KDC-X8019BT - Manual (Page 5)

English | 5
Before Using
When this unit is first turned on, the interactive
menu appears for setting the interface language
(KDC-X8019BTL only) and demonstration mode.
This menu disappears when no action is taken for
15 seconds.
For the KDC-X8019BT, start the procedure with
step 3. For the KDC-X8019BTL, start the procedure
with step 1.
1
Select the interface language to display the
Menu List mode, from English and Persian.
Turn the [VOL] knob to select the language, and
then press the [VOL] knob.
2
If you selected English in step 1, select the
language to display the audio file information,
from English, Arabic and Thai. (Persian is
automatically selected if you selected Persian
in step 1.)
3
Press the [VOL] knob to quit the demonstration
mode when the messages “To Cancel Demo
Press the volume knob” are displayed (approx.
15 seconds).
4
Turn the [VOL] knob to select “YES”, and then
press the [VOL] knob.
The interface language and demonstration
mode can also be set with the Menu List mode.
Refer to <Initial Settings> (page 33) and
<Demonstration mode Setting> (page 34) of
Instruction manual.
2-way/3-way Crossover Priority
Display
When this unit is reset or reconnected to the
battery, the current crossover mode (2-way or
3-way) is displayed.
When a standby source is selected, the “2 WAY”
or “3 WAY” indicator lights to indicate the current
crossover mode.
General operation
Common Operation
Power and source select
Turns the power ON by pressing the [SRC]
button.
When the power is ON, select a source.
• SRC Select mode 1: Pressing the [SRC] button
each time switches between sources.
Tuner (“TUNER”) ➜ Bluetooth Audio (“BT
AUDIO”) ➜ USB (“USB”) or iPod (“iPod”) ➜ SD
(“SD”) ➜ CD (“CD”) ➜ Auxiliary input (“AUX”) ➜
Standby (“STANDBY”) ➜ Tuner...
• SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
• The SRC Select mode can be set in “SRC Select” of <Initial
Settings> (page 33).
• Auxiliary input source is initially set to “OFF”. Set “Built in
AUX” described in <Initial Settings> (page 33) to “ON”.
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”.
Volume
Turning the [VOL] knob adjusts the sound
volume.
B64-4900-00_00_en.indd 5 11/12/28 12:04